SOK AQUA EXTRA KS

Performance Features

• application temperature: up to 70 °C (form temperature)
• contains very effective corrosion protection for steel shuttering
• free of solvents
• does not impair the adhesion of plaster, adhesives and paint
• largely prevents pore formation
• ensures the production of clean and uniform surfaces
• rain-resistant after emulsion breaking
• does not attack Styrofoam

Description

SOK AQUA EXTRA KS is an aqueous concrete release agent emulsion. SOK AQUA EXTRA KS is free of solvents.

Field of application

SOK AQUA EXTRA KS was particularly designed for the use in precast plants.

Application

SOK AQUA EXTRA KS is applied thinly and uniformly onto the clean and dry form using suitable spraying equipment (with Teejet nozzle SS 800067 or SS 1100067). The spraying pressure should be kept above 5.0 bar. Attention is to be paid to a very economical application. Drop formation and overdosage are to be avoided. Consumption amounts to approximately 1 litre for 25 to 50 m² according to the type of form. SOK AQUA EXTRA KS may not be mixed with release agents, water, oils or solvents. It is ready for use!

Notes

The container must be protected from direct sunlight. The container is to be well sealed after each withdrawal. Protect from frost. The product is to be used within 6 months after production (production date: see bar code label). The use of SOK AQUA EXTRA KS is neither subject to the Federal Law on Immission Control (BImSchG = Bundesimmissionsschutzgesetz) nor the VOC Directive. Please observe water resources policy act and EU safety data sheet! The product may not come in contact with zinc or galvanised materials.